Description

Ford Edge / Escape / Fusion / Taurus

 2.0 Ecoboost Engine Swap wiring & ECM

Plug and Play electronic solution with instructions

CAN-BUS emulator and engine ECM included

For the best possible price please send us an email with details of your engine swap and delivery address to check the best price for you.     ant_electronics@hotmail.com

This Wiring Harness Adapter was developed to allow the installation / swap of a 2.0 Ecoboost engine from various Ford between 2014-2019 into any other car. If your donor car is from 2014 or older please send us photos of your engine and wiring. These 2.0 Ecoboost engines can be found on Ford Edge, Escape, Fusion and Taurus. The ECU included in this Kit has original software from Ford Focus ST 250 bhp. If you want you can flash your ECU to increase the power of your engine, depending on the purpose and modifications of your engine.

With our Kit you don´t need to install any other ECU / clocks / cluster / immobiliser from original Ford donor car. Only need the engine ECM that is included in our Kit.

This Wiring Adapter is very easy to install. Basically you only need to connect some plugs, power supply (+12 V) and ground. You will find all the information needed and photos on the installation procedure included in this sale. From the original Ford donor car you must remove engine and the main engine wiring with one ECM connector. The other ECM connector is included on our wiring harness.

Contact us and we will send you a document explaining the parts needed to make your engine swap.

The engine ECM included in our Kit has the Immo / PATS system disabled to simplify your engine swap. Also other ECM modifications to allow it running correctly without other car ECU´s. The ECM included has original Ford Focus ST 250 bhp software. 

This Wiring adapter also includes an OBD connector to allow you to make diagnostic to the engine ECM and modify / tune your ECM if you want. Also included are additional wire outputs that you can use if wanted. These are:  RPM signal, temperature signal, oil pressure light, MIL light, alternator / battery light and cooling fan relay output.

We have available solutions for the following Ecoboost engines:

• 1.0 and 1.6 Ecoboost from Fiesta 2013-18
• 2.0 Ecoboost from Focus ST 2015-19
• 2.0 Ecoboost from Edge / Escape / Fusion / Taurus 2014-19
• 2.3 Ecoboost from Mustang
• 2.3 Ecoboost from Focus RS 

To build our wiring harness adaptors, we only use new, original and high quality electronic components.

Any question or doubt you can contact us. We Speak English, Portuguese, French and German.

Warranty – we offer 1 year warranty. If you have any problem, just contact us.

We ship worldwide. Most items will be sent within 24 hours.

VAT invoice:  all our items include a VAT invoice supplied with the goods.  Please tell us your VAT number for correct invoice.